如何更换漏油过滤器?
工具:
*wrench *socket set *new filter
步骤:
- Park the vehicle on a level surface and apply the parking brake.
- Locate the oil filler cap and remove it.
- Loosen the nuts on the old filter and remove it.
- Disconnect the old filter from the engine.
- Install the new filter, making sure the O-ring is seated properly.
- Tighten the nuts in a star pattern until snug.
- Replace the oil filler cap.
- Start the vehicle and check for leaks.
- Add oil to the engine until the level is correct.
提示:
- Use a wrench to loosen the nuts on the old filter.
- Be careful not to spill any oil.
- Use a new O-ring for a proper seal.
- Tighten the nuts in a star pattern until snug.
- Start the vehicle and check for leaks.