如何更换装载机液压油过滤器?

工具：

• wrench
• socket set
• oil filter wrench
• new oil filter

步骤：

1. Park the vehicle and turn off the engine.
2. Locate the oil filter. The oil filter is typically located near the engine block or near the transmission.
3. Disconnect the oil filter from the engine. Use the wrench to loosen the oil filter nuts and remove the oil filter.
4. Allow the old oil to drain out of the oil filter.
5. Install the new oil filter. Hand-tighten the oil filter until it is snug.
6. Tighten the oil filter nuts in a star pattern. Tighten the nuts until they are snug, but do not overtighten.
7. Replace the oil filter cap.
8. Start the engine and check for leaks.
9. Check the oil level and add oil if necessary.

提示：

• Use a new oil filter.
• Tighten the oil filter nuts in a star pattern.
• Be careful not to spill oil.
• If you are not comfortable changing an oil filter, you can take the vehicle to a mechanic.