如何更换装载机刹车漏油泵?
工具：
- 13mm wrench
- 10mm wrench
- 10mm socket
- 10mm socket set
- New pump
- New O-rings
步骤：
- Disassemble the old pump. Remove the bolts and nuts that hold the pump in place.
- Remove the old O-rings. Use the 10mm socket set to remove the old O-rings from the pump.
- Install the new O-rings. Apply a new O-ring to the new pump.
- Install the new pump. Insert the new pump into the pump housing.
- Replace the bolts and nuts. Use the 13mm wrench to tighten the bolts and nuts in a star pattern.
- Fill the system with brake fluid. Use the 10mm socket to fill the system with brake fluid.
- Start the engine and check the fluid level. Make sure the fluid level is correct.
- Bleed the brakes. Bleed the brakes until the fluid level reaches the proper level.
提示：
- Use a torque wrench to tighten the bolts and nuts.
- Be careful not to spill brake fluid.
- If you are not comfortable working on your brakes, you can take your car to a mechanic.
