如何更换装载机转向机换油封?

工具：

• wrench
• socket set
• oil drain pan
• new oil filter

步骤：

1. Park the vehicle on a level surface and apply the parking brake.
2. Locate the oil drain plug and oil filter. The oil drain plug is typically located at the bottom of the engine, while the oil filter is located near the front of the engine.
3. Drain the old oil. Use the oil drain plug to remove the old oil. Be careful not to spill any oil on the engine or other components.
4. Replace the oil filter. Remove the old oil filter and install the new oil filter. Hand-tighten the oil filter until it is snug, then tighten it in a star pattern with the wrench.
5. Replace the oil drain plug. Install the new oil drain plug and tighten it in a star pattern with the wrench.
6. Add new oil. Use the oil filter to add the new oil. Start the engine and check the oil level. Add oil until the engine reaches the correct level.
7. Start the engine and check for leaks. Run the engine for a few minutes and check for any leaks around the oil drain plug and oil filter.
8. Dispose of the old oil and filter properly.

提示：

• Use a new oil filter every 5,000 to 7,500 miles.
• If you are not comfortable changing an oil filter, you can take the vehicle to a mechanic.