如何更换刹车轮塞?
工具：
- 13mm wrench
- 10mm wrench
- 10mm socket
- Brake cleaner
步骤：
- ** parking brake off and engage the parking brake.**
- Loosen the wheel nuts on the wheel you are replacing. Use the 13mm wrench to turn the nuts counterclockwise until they are loose.
- Remove the wheel nuts and take off the wheel.
- Remove the old brake caliper and rotor. Use the 13mm wrench to loosen the nuts on the caliper and rotor, then remove them.
- Remove the old brake hose from the caliper. Use the 10mm socket to loosen the nuts on the hose, then remove it.
- Install the new brake hose onto the caliper. Make sure that the hose is seated properly.
- Reinstall the brake caliper and rotor. Use the 13mm wrench to tighten the nuts on the caliper and rotor.
- Connect the brake hose to the caliper. Use the 10mm socket to tighten the nuts on the hose.
- Reinstall the wheel and wheel nuts.
- Tighten the wheel nuts to the specified torque. Use the 13mm wrench to tighten the nuts in a star pattern.
- Bleed the brakes until the brakes are working properly.
- Remove the parking brake.
提示：
- If the brake caliper is stuck, you can try to loosen it with a heat gun or by soaking it with brake cleaner.
- If the brake hose is damaged, you can replace it with a new one.
- If you are not comfortable working on your brakes, you can take your car to a mechanic.
