如何更换铲车轮胎?

工具和材料：

• 新的轮胎
• 塞胎工具 *wrench
• Tire pressure gauge

步骤：

1. ** park the vehicle on a level surface and apply the parking brake.**
2. Loosen the lug nuts on the flat tire. Use the wrench to turn the nuts counterclockwise until they are loose.
3. Remove the lug nuts and take off the flat tire. Use the wrench to turn the nuts counterclockwise until they are loose.
4. Place the new tire on the hub. Make sure that the valve is facing up.
5. Put the lug nuts back on and tighten them snugly. Use the wrench to turn the nuts clockwise until they are snug.
6. Lower the vehicle until the tire touches the ground. Use the jack to raise the vehicle until the tire touches the ground.
7. Tighten the lug nuts in a star pattern. Tighten the nuts in a star pattern, tightening each nut a little bit at a time until they are snug.
8. Lower the vehicle completely.
9. Remove the jack and the wheel.
10. Inflate the new tire to the recommended pressure. Use the tire pressure gauge to set the pressure to the recommended level.
11. Replace the lug nuts and tighten them snugly.
12. Check the tire pressure and make sure it is correct.