如何更换油滤芯?

工具和材料：

• 新的油滤芯 *wrench
• Oil filter wrench
• Gloves
• Rags

步骤：

1. ** Park the vehicle on a level surface and apply the parking brake.**
2. Locate the oil filter. It is typically located under the engine, near the front or rear of the vehicle.
3. Loosen the oil filter using the wrench. Turn counterclockwise until it is loose.
4. Remove the old oil filter. Use the wrench to turn the filter counterclockwise until it comes loose.
5. Allow the old oil to drain completely. Use a rag to catch any drips.
6. Install the new oil filter. Hand-tighten the filter until it is snug.
7. Tighten the oil filter with the wrench. Tighten the filter in a star pattern, tightening each bolt a little bit at a time until it is snug.
8. Replace the oil drain plug. Tighten the plug clockwise until it is snug.
9. Start the vehicle and check the oil level. Add oil if necessary.
10. Dispose of the old oil and filter properly.

提示：

• Use a new oil filter every 7,500 to 10,000 miles.
• If you are not comfortable changing an oil filter, you can take the vehicle to a mechanic.